Hull and Deck Fittings

SS Marine Dart 18 Hull and Deck fittings are a combination original Laser, RWO Marine and Holt parts.

All prices quoted are inclusive of VAT, some items will require special delivery.

Bulls Eye Fairleads - £2.86

Holt Bulls Eye Fairleads (pair) These are fitted on the deck just behind the main chain plates, they are the fairleads for the bungee cord on the...

---

Fairlead - £1.15

Holt Fairlead this is fitted to the stern of the hull and is used for the trapeeze retaining rope. ...

---

Forward Chain Plate - £5.50

Heavy duty Forward Chain Plates Tang It is best to replace these in pairs they are supplied with the correct angle for Port and Starboard...

---

Hatch Cover - £4.00

Holt Hatch Cover 4" The small hatch cover used on the Dart 18, stops water getting in, so handy to have a spare onboard. ...

---

Hatch Cover Rim - £2.40

Holt Hatch Cover Rim 4" For Dart 18 hatch cover, each rim will require 6 SSM small rivets for fixing (not supplied, see fixings for...

---

Main Chain Plate - £6.20

Main Chain Plate Stainless steel, requires 3 SSM 25mm x M6 x panhead bolts for fixing (not supplied, see fixings for datails) Steves comment...

---

O Ring - £1.45

O Ring 4" 'O' Ring for Dart 18 manufactured by Steve using 5mm neoprene sponge rubber, being slighty thicker ensures a good seal for the...

---

Servo 22 Cam Cleat - £19.50

Servo 22 Cam Cleat 22 x 37mm These Cam Cleats can be fitted to the traveller car and also mainsheet block Steve says "these cleats are...

---

Toe Loop - £3.00

Replacement Toe Loop - supplied with pipe and SSM long rivet Steves tip "I usually repair the holes in the deck and then off set by 10mm for...

---